*The images are indicative and may vary from the actual product. Some accessories may not be included or components may be different. Check the components section within the product features
Customs fees not included.
The Avinox M2S drive unit uses intelligent sensors and algorithms to deliver a linear pedaling feel, with a maximum torque of up to 150 N·m [1] and a peak power of 1500W [1].
Innovative composite planetary gears and helical gear design reduce operating noise to as low as 45 dBA [2] for a quieter, more immersive ride.
A high-capacity 700 Wh battery combined with 3× super-fast charging [3] lets you enjoy epic all-day rides and helps eliminate range worries.
With up to 40 geometry combinations [4], the head tube angle, bottom bracket height, and chainstay length can be precisely adjusted to suit different trails and riding styles.
Weighing in at 2.59 kg [5], the Avinox M2S drive unit increases power density by 45% [6] and torque density by 21.6% [6] compared to the previous generation.
The Avinox Ride app imports third-party routes and converts ride history into route files to sync ride data with a single click.
1. The Avinox M2S drive unit has a rated power of 250 W, with a maximum power output of up to 1500 W in Trail, Turbo, Auto, and Boost modes, and a maximum torque of 150 N·m in Boost mode. Compared to the Avinox M1 model (with a maximum power output of 1000 W and a maximum torque of 120 N·m), this model offers approximately 45.9% and 21.6% increases in power and torque, respectively. Actual power output may vary depending on usage scenarios, riding modes, and system status. 2. Data was measured for Avinox in a quiet, open indoor environment using a binaural microphone at an axial distance of 0.1 m and a height of 1.5 m. 3. The data is obtained from comparative laboratory tests: charging the Avinox FP700 battery (from 0 to 80% charge) with the Avinox 508W Charger is approximately 3 times faster than using the Avinox 168W Charger. 4. The bike offers 5 head tube angle adjustments, 2 bottom bracket height adjustments, and 4 chainstay length adjustments. Users can combine these adjustments according to different riding styles and terrain conditions. Theoretically, these parameters can result in up to 40 different geometry configurations. The specific adjustment range and its corresponding effects depend on actual use. 5. The weight of the Avinox M2S drive unit excludes the heat sinks. 6. The data was obtained from Avinox laboratory calculations, based on a comparison with the Avinox M1 propulsion unit under identical test conditions. 7. Amflow PX supports importing route files in GPX, FIT, and TCX formats. Offline navigation is currently limited to a map-free mode, which only displays the route path.